Error Messages - Hamilton Beach Professional B79 Manuel D'utilisation

Troubleshooting

Error Messages

PROBLEM
All program buttons are
flashing.
The SMOOTHIE ( ) and
ICE CRUSH ( ) buttons
are flashing.
The HOT SOUP ( )
and WHOLE JUICE (
buttons are flashing.
Blender is plugged in and
Switch is in RESET (I)
position, but panel lights
are not illuminated.
NOTE: Buttons start flashing 10 seconds after a problem has occurred.
PROBABLE CAUSE/SOLUTION
• The motor has overheated during use. Turn Power Switch
to OFF ( ) and allow to cool for 15 minutes. Turn Power
Switch to RESET (I), and resume normal operation.
• Remove the Blender Jar and Lid. Stir contents and top
with Lid. Press HOT SOUP ( ) cycle. If the problem
persists, turn unit off, unplug from electrical outlet, and
contact the customer service center.
• The Blender speed has ramped up to high too quickly
and run on high speed. Turn the unit off, unplug from the
)
electrical outlet, and call the customer service center.
• Blender enters standby mode after 3 minutes of inactivity
to conserve power. Press any control panel button or
Switch to resume normal operation.
15