Hamilton Beach Professional B79 Manuel D'utilisation page 4

thick towel, place one hand on
top of the lid, keep exposed
skin away from the lid, and
start blending at lowest speed.
E
21. nsure cutter assembly is
tight and secure to jar. Injury
can result if moving blades
accidentally become exposed.
D
22. o not leave blender
unattended while it is
operating.
C
23. heck that the appliance
is OFF ( ) before plugging
cord into wall outlet.
disconnect, turn the control
to OFF ( ); then remove plug
from wall outlet.
grasp the plug and pull from
the outlet.
the power cord.
D
24. o not use appliance for
other than intended purpose.
SAVE THESE INSTRUCTIONS
4
T
o
T
o unplug,
N
ever pull from
CAUTION! I
25.
to avoid a hazard due to
inadvertent resetting of the
thermal cut-off, this appliance
must not be supplied through
an external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.
T
26. he plug is provided with a
13-amp fuse approved by
ASTA
to
you need a replacement fuse
carrier, it must be replaced
with the same colour-
coded carrier with the same
markings. Fuse covers and
carriers can be obtained from
approved service agents.
D
27. o not operate more than 2
minutes ON at a time, except
during preset programs.
n order
B.S.
1362. If