Operating The Appliance; Switching Off; Switching On; Power Stage - Caso Germany Master E4 Mode D'emploi

15.4 Operating the Appliance

15.4.1

Switching Off

15.4.2

Switching On

15.4.3

Power Stage

15.4.4

Booster

caso Master E4
The complete appliance is switched off using the Master On/Off
switch (1).
Each hob is switched off by using the key +/- (2) (press
simultaneously) or choose power level "0".
Please note
► Note that the appliance's fan continues to operate for a while
after the appliance has been switched off in order to dissipate the
heat that has built up in the appliance.
Press the Master On/Off switch (1), the keys light up and an
acoustic signal sounds. Now the device is in standby mode.
Place a suitable cooking pot with its contents to be cooked on the
centre on the hob (Ø 120 mm - 260 mm). Now select the power
level of the appropriate hob.
Press the selection key +/- (2) as long as necessary to select
the power stage (Indicator lamp showing correct power stage).
The preset power stage "5" is selected and the device turns on.
With the + / - Keys (2), you can change the settings at any
time in a range from 1 – 9.
To reach the desired temperature very fast, press directly
Booster (3), after selecting the power level. The display
shows "P" and within the next 5 minutes additional booster
power is reached. Afterwards the hob switches back to the
pre-selected power level.
As the boost function is activated for one hob, the corresponding
hob is limited under power level 2 automatically (1 and 3, or 2
and 4).
For de-activation of booster press again Booster (3) or"-",
switches back to the pre-selected power level.
the hob
58