Instructions On Cookware - Caso Germany Master E4 Mode D'emploi

15.2 Instructions on Cookware

caso Master E4
The cooking pot used for the induction cooking surface must be
made of metal, have magnetic characteristics and have a
sufficient, flat bottom surface.
Here is how to decide if the pot is suitable:
Ensure that the pot bears an inscription stating its suitability for
cooking with induction current, or perform the following magnet
test:

Place a magnet (e.g. a magnet from a magnetic board)
close to the base of your cooking pot. If it is strongly
attracted then you can use the cooking pot on the
induction hob.
The table below serves as a guide to help you choose the correct
cooking utensils:
Suitable
Cookware
Enamel-coated steel pots
with thick bases
Cast-iron pots
with enamel-coated bases
Pots made of stainless steel,
multi-layered steel, stainless
steel ferrite steel or aluminium
with special base
Please note
► Using the induction-compatible pots of some manufacturers
can lead to the occurrence of noises that are due to the design
of these pots.
Unsuitable Cookware
Pots made of copper,
aluminium, heat-resistant
glass and other non-metallic
pots
Pots made of stainless steel
without a magnet iron core
Pots that do not sit flat on the
hob
Pots with a base diameter of
less than 12 cm or more than
26 cm
56