General installation instruction
GU-SECURY Automatic Panik |SECURY 19 | SECURY 21
Multi-point locks
Observe the installation, maintenance and operating instructions. It
is particularly important to ensure that all keepers and covers are fully
installed.
Operators of such a locking system must be instructed about its
intended use.
Attach a clearly visible pictograph indicating operation of the handle
to the inside of the door or in the escape direction directly above the
hardware, or on the hardware itself if it has a sufficiently large flat area
to accommodate the lettering.
All statutory regulations in relation to use of the locking system on fire
and smoke protection doors remain fully valid.
Fig. 3: Max. door dimensions and weights
EN
20
max. 1500 mm
max. 1500 mm
max. 300 kg
max. 300 kg
04.2016 | G26788 | Designed in Germany