How To Use Planotime; Selecting The Operating Modes - Nice Planotime Instructions Et Recommandations Pour L'installation

Table 10 List of symbols in area 3
It refers to a special control for the activation of the automatic commands coming from the weather
sensors (see chapter 1.5)
It refers to a special control for the de-activation of the automatic commands coming from the
weather sensors (see chapter 1.5)
It refers to a command that activates the special "holiday" function (see chapter 1.5)
It refers to a command that activates the special "planetary time" function (see chapter 1.5)
It refers to a command that activates the special "timed control" function (see chapter 1.5)
1 6
.... They refer to the 6 groups and the direction of movement where applicable

4) How to use PLANOTIME

PLANOTIME can be used in different operating modes:
Auto "Automatic" operating mode (see chapter 4.2)
In "automatic" mode, PLANOTIME executes the programmed events on the established days and times.
Auto "Nicetime" operating mode (see chapter 4.3)
Man
In "Nicetime" mode, PLANOTIME operates just like in "manual" mode, except that it will return to the "automatic" oper-
ating mode on a specified day and time. In practice, this enables the interruption of the "automatic" mode for a set peri-
od of time.
Man "Manual" operating mode (see chapter 4.4)
In "Manual" mode, PLANOTIME will transmit to the selected groups only the commands activated through the direct
operation of keys
Note: the "automatic" mode is the only one for which it is not important that the timer be set correctly.
Man Rec "Manual with recorder" operating mode (see chapter 4.5)
In the "manual with recorder" mode, PLANOTIME operates just like in "manual" mode, except that the transmitted
commands will be recorded as events and memorized together with the day and time on which they have occurred.
This allows you to create events without having to program them directly one by one, by simply using PLANOTIME
in "manual" mode for a week.
Prog "Programming" mode (see chapter 5)
In the "programming" mode you can program, modify, copy and delete the events; you can also set the timer and the
other parameters that are useful for the operation of PLANOTIME.

4.1) Selecting the operating modes

To access the desired operating mode you must select and confirm it in the "selection menu".
The "selection menu" can be considered as the starting point for the selection of the PLANOTIME functions: "Auto",
"Man", "Man REC " and "Prog".
From any of PLANOTIME's operating or programming modes, you can return to the "selection menu" by repeatedly
pressing key until "Auto" starts flashing.
.
G
9