Nice Planotime Instructions Et Recommandations Pour L'installation page 14

5.2.1) Programming: new event NEW
Table 23 Programming a simple "new event" (example 1 in table N. 22):
1. Press key
2. Press key
3. Press key
4. Press key
5. Press key
6. Press key
7. Press key
8. Press key
9. Press key
10. Press key
11. Press key
12. Press key
(in the example: only Mo=Monday)
13. Press key
14. Press key
15. Press key
(in the example: no special "
16. Press key
(in the example: no special "holiday"
17. Press key
(in the example: no special "planetary time"
18. Press key
(in the example: no special "timed"
19. Now all the parts of the selected event start flashing to indicate that the
programming of the new event has been completed.
Press key
With the last confirmation the event is memorized and PLANOTIME is ready for programming another new event; you
can proceed starting from step N. 5 in this table.
14
repeatedly a number of times until Auto starts flashing
3 times to select the Prog "programming" mode
to confirm the "programming" mode
to confirm the programming of "events"
to confirm the programming of a "new event" NEW
or to set the hours
(in the example: 08)
to confirm the hours
or to set the minutes (in the example: 30 )
to confirm the minutes
or to choose the day of the week
to select the day of the week
to confirm the day of the week
to select the "Up" command for group 1
to confirm the command
to confirm the event (in the example: no special
" or "
to confirm the event
command)
to confirm the event
to confirm the event
command)
to confirm the event or press key
(in the example: Mo=Monday)
(in the example: "Up" for group 1 )
")
command)
to go back to an earlier stage.
Example
... Auto
or
or
or