STEAMAX OSUB BABY SET Manuel D'utilisation page 71

STEAMAX TFV8 BABY – COMMISSIONING OF THE DEVICE
Changing the Atomizer Head
1. Remove the TFV8 Baby clearomizer from the battery of your e-cigarette.
2. Screw the head base counterclockwise from the glass tank.
3. Remove the old atomizer head and insert a new one. Please first drip a few drops
of e-liquid directly into the wick of the coil to make it fully saturated before
first use.
4. Connect all parts again and screw the clearomizer back to the battery. Make sure
that no e-liquid can overflow and / or leak.
5. Screw the clearomizer back to the battery.
Please note the following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit before vaping. Please take
several puffs without activating the atomizer and leave the atomizer head sit for 15 minutes in the e-liquid
filled tank before use. Don't clean atomizer heads with water. Because atomizer coils are wearing parts, they
must be changed regularly.
www.steamax.com
69