Introduction - Paslode CF325XP Mode D'emploi

Introduction

Paslode Cordless Framing Nailer
Operating Manual
This manual is intended to acquaint you with the
Paslode Cordless Framing Nailer. Unlike other power ®
fastening tools, the Cordless Framing Nailer is powered
by an internal combustion linear motor. In simpler
terms, your Cordless Framing Nailer is powered by a
motor similar to the one that powers an automobile. The
Cordless Framing Nailer ignites a fuel and air mixture to
produce the energy to drive the motor, which in turn
drives the fastener. As you will see, the Cordless Fram-
ing Nailer is totally self-contained. It carries its own fuel
supply and battery, along with a supply of fasteners.
For ease of use, this manual is divided into sections
(see Contents). Each section of the manual is written
with you, the tool operator, in mind. We have left out all
of the technical terms so that you can readily under-
stand how to get the maximum performance from your
Cordless Framing Nailer, and how to avoid damaging
the tool or injuring yourself. But, to accomplish this, we
need you to do two things:
1. READ THE MANUAL FROM COVER TO COVER
BEFORE USING THE TOOL.
2. FOLLOW ALL INSTRUCTIONS IN THE MANUAL.
2
The Cordless Framing Nailer should be handled like other
power fastening tools that you use. Like most tools, when
used improperly it could result in injury. If you are going to
allow others to use the Cordless Framing Nailer,it is your
responsibility to make sure that they also read and comply
with the instructions in this manual before attempting to
operate the tool.
Should you have questions about the Cordless Framing
Nailer, or wish to obtain additional copies of this
manual,please contact your Paslode
space below is provided so that you may record your
representative's name, address, and telephone number.
My Paslode representative is:
Name
Address
C y t i
Telephone Number
representative. The
®
S a t e t Z p i