Specifi Cation - GRAUPNER ULTRA TRIO PLUS 16 Instructions D'utilisation

Battery Output 1:
Charge currents / power
supply
Discharge currents / power
Ni-Cd & Ni-MH batteries:
Cell count
Capacity
Lithium batteries:
Cell count
Cell voltage
Capacity
Lead-acid / lead-gel batteries:
Cell count
Battery voltage
Capacity
Battery Output 2 and 3:
Charge currents / power
Ni-Cd & Ni-MH batteries:
Cell count
Capacity
Lithium batteries:
Cell count
Cell voltage
Capacity
General:
Operating voltage range DC input
Operating voltage range AC input
Output power overall max.:
Car battery required
Mains PSU required
balancer connector Output 1:
balancer connector Output 2, 3:
balancing current Output 1:
balancer current Output 2, 3:
Low-voltage cut-off approx
Weight approx.
Dimensions approx. (WxDxH)
All data assumes a car battery voltage of 12.7 V.
The stated values are guidelines, and may vary according to battery state, temperature etc.
1)
When powered by a mains PSU, the charger will only operate correctly if the PSU is suitable in terms of voltage,
stability, maximum load capacity etc. You can avoid problems by using only the PSUs which we specifi cally recommend.
20. Specifi cation
100 mA to 10.0 A / max. 120 W with internal power supply
100 mA to 10.0 A / max. 150 W with external 12...15V DC power
100 mA to 50 A / max. 40 W
1 - 14 cells
min. 0,1 Ah to 9,9 Ah
1-8 cells
3,3 V (LiFe), 3,6 V (LiIo) / 3,7 V (LiPo/LiMn)
min. 0,1 Ah to 20 Ah
1, 2, 3, 6 cells
2, 4, 6, 12 V
min. 1 Ah
0.1 A to 1.0 A
1 - 8 cells
min. 0,1 Ah to 6,0 Ah
1 - 3 cells
3,3 V (LiFe), 3,6 V (LiIo) / 3,7 V (LiPo/LiMn)
min. 0,05 Ah to 5,5 Ah
11,0 to 15 V
200 ~ 240 V
150 W
12 V, min. 30 Ah
12-15 V, min. 15 A stabilised
1...8 NiMH/NiCd/LiPo/LiIo/LiFe cells
1...3 LiPo/LiIo/LiFe cells
NiMH/NiCd: 0.1A, LiPo/LiIo/LiFe: 0.3A
LiPo/LiIo/LiFe: max. 42mA
11,0 V
1100 g
200 x 180 x 75 mm
1)
51