Ego Power+ HTX6500 Guide D'utilisation page 28

PROBLEM CAUSE
◾
◾
Excessive ◾
vibration or
noise.
◾
◾
28
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500
Dry or corroded blades.
Blades or blade support is bent.
Bend or damaged blade teeth.
Loose blade bolts.
Insufficient drive gear
lubrication.
SOLUTION
◾
Lubricate the blades, following the
instructions in the "LUBRICATING THE
BLADE" section in this manual.
◾
Replace with a new blade or
blade support. Contact EGO
authorized dealer/distributor for
replacement service.
◾
Replace with a new blade. Contact
EGO authorized dealer/distributor for
replacement service.
◾
Use an appropriate hex wrench to turn
the blade bolts in clockwise direction to
tighten them.
◾
Lubricate the drive gear, following the
instructions in the "LUBRICATING THE
DRIVE GEAR" section in this manual.