Human Touch ht 7120 Mode D'emploi Et D'entretien page 4

get ready
Unpack the box
Chair
1. Plug it in
Plug the power cord into a grounded 120-volt wall outlet.
2. Power on
Turn the master power switch to On (located on
the bottom center of the chair back).
The power panel on your Human Touch
massage chair offers a convenient outlet,
which enables you to plug in a low-
wattage appliance such as a lamp or
laptop. Do not plug in appliances that
use wattages higher than 1 AMP, such
as a vacuum or a hair dryer.
humantouch.com
Head Pillow
6
Your Human Touch massage chair
simple assembly (no tools required). Simply
plug it in, turn it on, install the head pillow, and
you're done!
3. Raise the backrest
Use the remote control to raise the
backrest to an upright position.
4. Attach the head pillow
Attach the head pillow to the top of the backrest
using the hook and loop fasteners.
7
requires some