Quick Start Guide - NORSE PROFESSIONAL SK25i Mode D'emploi

SK25i

Quick Start Guide

The following steps describe the quickest method to get your power washer up and
running. However, it is essential you fully read this manual to ensure you are familiar with
the general safety features, precautions and functions necessary to operate the product.
Failure to do so may result in injury and damage to your washer or personal items.
13
To install the battery pack (13), slide into the
battery bay on the underside of the pressure
washer. Ensure it has locked in place.
12
To draw from standing water (non-pressurised),
first attach the water suction hose (12) to the
pressure washer. Connect the water filter (10)
to the other end of the hose and place in water
supply. Only use clean water. Max draw height is
1 metre from water source. Ensure filter is fully
submerged.
Connect lance A (07) to the pressure washer by
pushing and turning clockwise until locked. Insert
lance B (08) into the end of lance A (07). Attach the
4 in 1 nozzle (09) to lance B (08) only, by pushing
and turning clockwise. Turn anticlockwise to
remove.
12
10
The power washer will also draw from a faucet.
Connect a hose to the pressure washer using
the supplied quick fit adapter. Turn on the water
supply.
© NØRSE
English
07
08
09
3