Foam Cannon - NORSE PROFESSIONAL SK25i Mode D'emploi

SK25i
03
Push the safety lock button (02) to unlock the
water trigger.
Point the power washer in a safe direction.
Squeeze the power trigger (03) to start then
squeeze the water trigger (04) to intake water.
4 in 1 Nozzle
The power washer is supplied with a 4 in 1 nozzle (09). The variable spray patterns are suitable for a
variety of cleaning applications. Attach to the end of Lance A or B by inserting and rotating clockwise. To
change spray pattern, ensure the pressure washer has the safety lock on, then turn the nozzle clockwise.

Foam Cannon

The foam cannon covers large areas with detergent foam for enhanced cleaning. Attach to the lance by
pushing and rotating clockwise.
Twist the dial to adjust the level of soap as indicated
on to of the foam cannon. Twist towards 'max' for a
higher concentration of soap or towards 'min' for a
more diluted mix.
4
02
04
0 o Pencil jet Turbo Nozzle
© NØRSE
English
03
04
To stop, release the power trigger and water
trigger. Allow the motor to come to a complete
stop before squeezing the trigger again.
To swap between 'min' and 'max' power, quickly
double click the power trigger (within 0.8 seconds)
to toggle power modes.
20 o Fixed Spray
MIN MAX
03
0.8 sec
60 o Fixed Spray
11