Quick Start Guide - NORSE PROFESSIONAL SK135 Manuel D'utilisation

SK135

Quick Start Guide

The following steps describe the quickest method to get your pressure washer up and
running. However, it is essential you fully read this manual to ensure you are familiar with
the general safety features, precautions and functions necessary to operate the product.
Failure to do so may result in injury and damage to your washer or personal items.
Slide the handle (01) on the reel frame and fix
it with two screws (23). Tighten the screws (23)
using a suitable screwdriver.
17
Push the latch (17e) on the spray gun (17) to open
the connecting port and insert the connector of the
high pressure hose (9). Release the latch (17e) to
lock the hose (09) in place. Check the connection
by pulling on the hose. It should not pull out.
1
01
23
23
09
17e
English
04
Push the hose reel crank (02) into the opening of
the reel (10), ensure it clicks in place. Screw the
water hose connector (04) to the water inlet (05)
18
Insert the extension lance (18) into the end of the
spray gun (17) by pushing together and turning
clockwise at the same time.
Insert the 20o fixed nozzle (19) into the end of the
extension lance by pressing the blue button on the
end of the extension lance, then press the fixed
spray nozzle into the extension lance and turn
clockwise until it "clicks into place.
© NØRSE
10
02
05
17
19
17f
3