Troubleshooting; Technical Data; Disposal Regulations - NORSE PROFESSIONAL SK25i Mode D'emploi

SK25i

Troubleshooting

Issue
Power cleaner will not turn on
No water comes out of the
nozzle
Self-priming is ineffective
2x power not engaging

Technical Data

Model
Working pressure
Allowable pressure
Maximum flow rate
Noise level
Power supply
Charger voltage input
Charger voltage output
Weight

Disposal Regulations

Do not dispose of electrical machines as unsorted municipal waste, use separate
collection facilities. Contact your local government for information regarding the
collection systems available. If electrical machines are disposed of in landfills
or dumps, hazardous substances can leak into the groundwater and get into the
food chain, damaging your health and well-being.
For transportation safety, the machine should comply with ISTA.
10
Corrective Action
Check the battery charge level by pushing the button beside the
power indicator light. Check the safety lock above your thumb to
make sure is pushed in.
Make sure when you pull the power trigger, your hand is squeezing
the water trigger at same time. A full self-priming process from
empty hose will take 30 seconds under max mode.
Make sure the garden hose adaptor is tightly connected with the
screen inside. Push again the connectors on both ends of the hose to
the garden hose adaptor and garden hose filter to make sure they are
connected tightly. The garden hose filter has to be below the water
level. Check the suction height from water source. Remove hose
kinks. Clean the water filter.
Make sure to double click of the power trigger in 0.8 seconds.
SK25i
23 BAR (333 PSI)
25 BAR (363 PSI)
3 Litres / min
80dB
20V Lithium ion battery
240 AC
21V DC 65W
1.5 Kg
© NØRSE
English