Specifications; Back View; Led Display Led Status Indicator; Led Status Indicator - Leviton LWCYC-00B Mode D'emploi

SPECIFICATIONS
Model
Operating Voltage
Control Modes
White Light Color Temperature
Service Life
Ambient Temperature
Output Power
Beam angle
Control signal
Dimming
IP Rating
Dimensions
Weight (kg)
LED Display
Yoke
Reset
Button
Power
Switch
Fuse
LED DISPLAY - Digits and characters
1. Digits 0-9
2. Common letters: A, B, C , D, E and F
3. Special letters: H, L, N, O, P, Q, R, S, T and U
NOTE: The character I and number 1 have the same display
format, and so does the character S and number 5.
> 20,000 hours (ambient temperature < 25°C)
Horizontal: 65°; Vertical: 80°(approx.)
USITT DMX512-A (ANSI E1.11), RDM (ANSI E1.20)
W 20.3" x H 13.1" x D 8.1" (W 516mm x H 332mm x D 205mm)

BACK VIEW

LED Status Indicator

Power Power Input XLR
Input Output 5-pin (male)
2
LWCYC-00B
100V-260VAC, 50/60Hz
4COL/HSI/FIL/CCT
3200K/4300K/5600K/6500K
0-35°C
350W
0-100% linear dimming
IP20
13.5
Function Knob
Output XLR
5-pin (female)
LED STATUS INDICATOR
PWR Red: Turns ON when the power connection is
normal and power switch is set to ON.
SYS Orange: No display under normal conditions;
flashing when the temperature of light
source substrate exceeds the limit.
SIG Green: Turns ON when DMX512/RDM signal is
received. No display when no signal is
received.
PWR Y IG
OPERATION
1) rotate to change
2) press to select function
Yoke
Fastening
Knob