KLIM Ai-1 Manuel D'utilisation page 9

4. Remove the empty inflator
Warning! The inflator must be handled carefully
Wash your hands before and after replacing the inflator.
Conduct the following operations in a clean and dry
environment.
Remove the In&box from its housing.
Open the zipper on the back to access the inflator.
Unclip the inflator from its housing. To do this, pull the inflator to
remove it from its housing.
1
Warning! To avoid damage, do not force the
connector and do not pull on the cable to
remove the inflator.
Press the two tabs and then pull gently. If it's
not easy, press on one connector tab, then the
other and so on.
2
Check that the seal is positioned correctly
and is not damaged.
Unscrew the used inflator.
ENGLISH 9