KLIM Ai-1 Manuel D'utilisation page 6

manual with the product when travelling, notably by airplane. If
it is used incorrectly, the vest may cause an unsuitable inflation,
which could damage your belongings or even create a safety
risk for other people. On the In&motion site www.inemotion.com
you will find the necessary documents to facilitate the transport
of your product. In&motion cannot be held liable in the event an
airline refuses to transport the product by airplane.
PRODUCT INSPECTION (K)
After an impact, the back protector, the airbag system and in
particular the airbag cushion, may be partially damaged by
having absorbed the energy from the impact to reduce its force.
Time can also partially damage your product. Systematically
before every use check visually your protection equipment to
confirm that it is in good useable condition and not damaged:
• No fabric deterioration (excessive bubbling, snags, fraying
seams, broken seams, over-stitching)
• No deterioration of the plastic parts (fissures, cracking,
whitening).
"This product should only be serviced/repaired by KLIM to
guarantee the full functionality of this product. Under no
circumstances should the vest be modified or disassembled."
"Follow local regulations for recycling/discarding the vest and
back protector."
The vest life cycle is variable. It depends on the frequency and
conditions of use. Used and maintained correctly, the vest is
guaranteed 2 years starting from the date of purchase.
It has been designed to withstand 3 inflations without
mandatory return to the manufacturer [www.KLIM.com]
for inspection, provided that the post- inflation inspection
procedure is always respected. After having endured 3
inflations, the airbag vest may function improperly.
PROTECTIVE PRODUCT COMPATABILITY (L)
SEE "JACKET COMPATABILITY"
INFLATOR TYPE (M)
SEE "INFLATOR REPLACEMENT"
DESCRIPTION OF COMPONENTS (N)
AIRBAG VEST:
Vest integrating the In&motion airbag
system. Ai-1 Airbag Vest 3046-000
6 ENGLISH