KLIM Ai-1 Manuel D'utilisation page 22

7 USE AND STORAGE INSTRUCTIONS
The back protector must be used and store exclusively at
temperatures between -10°C and 45°C (14°F and 113°F).
Prolonged exposure of the system to temperatures exceeding
this range may compromise its functionality. Keep the back
protector in a clean area and away from humidity.
Transport the back protector in clean packaging protecting it
from humidity.
After an impact, the back protector may be partially damaged
by having absorbed the energy from the impact to reduce its
force. Systematically check your protection equipment before
use to confirm that it is in good useable condition and not
damaged. If you suspect any deterioration, contact your local
reseller.
Do not, under any circumstances, modify your back protector
nor its components. Any modification of any kind may
compromise its functions and, consequently, its protection
performances in case of a fall or accident.
Do not repair or replace with any other parts or accessories
which is not an original In&motion item.
To clean the back protector, use a soft wet cotton cloth on the
foam or plastic part.
Warning, do not clean the inflator. The inflator connector and the
inflator must not encounter water.
22 ENGLISH
Pictogram indicating exclusive motorcycle
use of the protection with the type of
FB protector (full back protector), the
performance level (1); as well as the
information concerning the size (distance
between the waist and the shoulder)
EN1621-2:2014 : reference technical standard
Name and address of manufacturer
Product serial number