Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. Connect the Water Tube (C).
Connect the two connectors on the left door
and the one connector (E) on the right door.
E
C
6. Attach the front of the Top Cover, and then
press down on its back until it lies flat.
Re-attach the screws.
CAUTION
• Assemble the Fridge and Freezer doors in the
reverse order of disassembly.
• If the Wire Connectors are cross-assembled,
the display will not work properly.
E
DA68-03194D-06.indb 14
E
Center of the Indicator
Line
English - 14
LEVELING THE REFRIGERATOR
AND ADJUSTING THE HEIGHT
AND GAP OF THE DOORS
How to level the refrigerator
To ensure your refrigerator is stable, install it on
a flat, level surface and level it according to the
instructions in this section.
CAUTION
Failure to level the refrigerator may result in the
refrigerator tipping over and causing personal
injury.
- If the front of the refrigerator is slightly higher
than the rear, the doors can be opened and
closed more easily.
- When you install the refrigerator, make sure the
adjustable legs touch the floor.
The adjustable legs are located just behind the
doors on the bottom front right and left corners
of the refrigerator.
2018. 7. 9.
4:40
Publicité
Table des Matières
