Main Functions; Unpacking And Checking Equipment; Charging The Battery; Using The Battery - Retevis RB85 Manuel De L'utilisateur

Main functions

TOT
Scan
CTCSS/DCS
Chinese and English voice prompt
Battery Saving function
Low battery alert
Hi/ Low power selectable
Wide/Narrow band selectable
VOX
Programming protect
Busy lock function
Squelch level selectable
Scrambler
ANI function(Active Noise Cancellng)
10W/5W selectable via side-key/CPS
Side-key assignment

Unpacking and checking equipment

Welcome to use our two-way radio. Carefully unpack the radio. We recommend you check the items listed in the
following table before discarding the package. If any item is missing, please contact local dealer immediately.
Supplied Accessories
Antenna Li-ion Battery Belt Clip
RB85
User's manual
Charge
User's Manua

Charging the Battery

Please use the designated battery charger to charge battery, and follow the steps
• Insert DC jack of power adapter into DC jack behind the charging kit.
• Insert power adapter into AC power supply socket, now the charging red and green
indicator lights, successfuly connect the power supply.
• Insert the battery to radio equipped with battery into the charging kit.
Red indicator keeps lighting means radio is under charging.
Red indicator flashes means battery not be used for long time andover-discharged.
And will Turn to normal charge when red indicator keeps lighting.
• Confirm the battery is fully charged, when red indicator goes out.
• Please take off the adaptor and battery.

Using the battery

The battery is not completely charged at the factory, please charge it before using.
After purchase or extended storage(more than two months), the first time to charge batterycannot make battery
reach its normal operating capacity. After repeating charge /discharge it two or three times, the operating
capacity wllincrease to its normal capacity.
1