Table des Matières
Publicité
Ember Placement
A bag of embers is included with your appliance to enhance the firebox. Place a layer of embers
along the edges of the burner, on top of screw-heads, and along the perimeter to enhance the
aesthetics of the firebox. Do not place embers over any burner holes. See the photo below. Place a
layer of embers along any visible edges of the burner.
Rockwool Installation
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the
rock wool is to brush it on to the burner. Compress a clump of rockwool between your thumb and
forefinger. Use a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do not use the
entire bag of rockwool. Use only a small amount and save the remainder. Over-use of rockwool will
diminish the glow and may cause sooting or other adverse conditions.
© Travis Industries
Fonctionnement
4100326
25
100-01250_000
Publicité
Table des Matières
