Keypad Overview; Led Indicators - Supelco Spectroquant Data Transfer Mode D'emploi

1.3 Keypad Overview

- Switches the unit on and off
ON/OFF
- Used to switch between the following interface modes
SELECT
(scroll function)
• USB PC interface
• USB printer interface
• Serial printer interface
RESET - Reset the Data Transfer board to default configuration
- Used during firmware update in combination with the ON/OFF
button

1.4 LED Indicators

LED Indications:
• POWER indicator will be illuminated if the Data Transfer is running.
• PC interface indicator will be illuminated if the PC interface mode is selected
and the cable is connected with PC. The LED flashes if the PC is not correctly
connected.
• USB printer interface indicator will be illuminated if the USB printer interface
mode is selected and the cable is connected to printer. The LED flashes if the
USB printer is not correctly connected.
• Serial printer interface indicator will be illuminated if the RS232 printer
interface mode is selected. It will not check for the presence of a serial printer.
Reset Select
Data Transfer keys
PC
ON
Data Transfer keypad layout
On/Off
EN
5