tormatic W-600 Mode D'emploi page 45

Menu A:
Set open time
Only in conjunction with function 'Automatic close'.
1. Select menu item "A".
After approximately 2 seconds, the display flashes and shows the set value of the operating mode.
2. If desired, adjust the setting with the aid of the OPEN (B) and CLOSE (C) buttons.
Menu value Open time (without warning time 10 seconds)
0 0 s
1 10 s
2 30 s
3 60 s
4 90 s
5 120 s
6 150 s
7 180 s
8 210 s
9 240 s
3. Press the programming button (PROG button) (D).
The display shows "0".
4. Proceed with the force learning cycle.
W-600
Installation
45