Tips About Indicator Panel - Sharp AY-XP07ER Notice D'utilisation

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings
0
9
Heat
( 4¡C)
1
indoor temp.
(¡C)
the figures in ( ) are temperature settings
During operation, if the outdoor temperature changes, the temperature settings will automati-
cally slide as shown in the chart.

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press
the DISPLAY button in the following manner.
temperature Room Temp.
Indiactor Lamp
temperature
Indiactor
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual temperatures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C (
than 40°C)
Outdoor temperature: -9°C ~ 45°C (
than 45°C)
• is displayed during the first 60 seconds of operation while the temperatures are being
detected.
• Only the room temperature can be displayed for 5 seconds when the unit is not in operation.
10 18
Cool
( 4¡C)
Heat Dry
( 3¡C) ( )
Room Temp.
- ¡C
Heat
( ¡C)
Outdoor Temp.
Lamp
is displayed when less than 0°C and
is displayed when less than -9°C and
outdoor
(¡C)
8 34
temp.
Cool Cool
( 5¡C) ( 6¡C)
The room tem-
perature is dis-
played.
The outdoor
temperature is
displayed.
No display.
E-9
DISPLAY
when higher
when higher