Human Touch HT-5020 Manuel D'utilisation Et D'entretien page 4

get ready
Unpack the box
Chair Seat Pad
1. Unfold the chair
Remove all packaging materials from the
chair. Pull up on the backrest to unfold the
chair to an upright position. The backrest
locks into place automatically.
humantouch.com
Backrest Pad Head Pillow
2. Attach the backrest pad
Attach the top backrest pad flap to the top of the
backrest. Smooth the pad from top to bottom, so it
lays flat against the backrest.
4
Your Human Touch massage chair
simple assembly (no tools required). Just attach
the backrest pad, the seat pad and the head
pillow, and you're done!
3. Attach the seat pad
Align the hook-and-loop fasteners on the bottom of the
seat pad with the hook-and-loop fasteners on the chair
seat, then press the seat pad firmly into place.
4. Attach the head pillow
Attach the head pillow flap to the backrest pad flap,
using the hook-and-loop fasteners.
To collapse the chair for moving, press down on the backrest release lever, located on the back of the
chair under the rear right-hand corner of the seat, then push the backrest down onto the chair seat.
5
requires some