Kimberly-Clark PROFESSIONAL ICON Guide Utilisateur page 5

Cage Installation
1. Determine the location to
mount the dispenser using a
stud finder and mark the rough
wall opening.
2. Note that it is important to
install the dispenser 12 inches
above the counter or other
obstruction. Please consider
this when deciding where to
install the dispenser.
3. While measuring an installation
location, note that the lock
position can be reversed.
Ensure that you have adequate
space to access it.
4. Cut an investigation hole
to ensure that there is not
plumbing, electric, etc. in the
install area and use a flash light
or right angle mirror to check
the area.
5. The first cut for the install
should be 12 inches from a
counter or 53 inches from the
floor. Verify your region's legal
height requirements.
1.
2.
53"
1.35m
3.
5.
11.125"
12"
0.3 m
4.
11.125"
15.375"
15.375"