Inserting The Battery - Braun Silk-epil FG 1100 Mode D'emploi

English
Thank you for purchasing the Braun
Silk·épil FG 1100 which precisely removes
unwanted hairs from body, face and bikini
area. We hope you will enjoy using the
appliance.
Please read the use instructions carefully
and thoroughly before using it.
Important
• The appliance is not intended for use
by children or persons with reduced
physical, sensory or mental capabilities,
unless they are supervised by a person
responsible for their safety. Keep the
appliance out of reach of children to
ensure that they do not play with it.
• Batteries may leak if empty or not used
for a long time. In order to protect you
and the appliance, please remove
batteries in a timely manner and avoid
skin contact whilst handling leaking
batteries.
• For hygienic reasons, do not share this
appliance with other persons.
• Do not use the appliance on irritated or
inflamed skin.
• Never use the appliance with a dam-
aged cutting head.
Description
1 Protective cap
2 Precision cutting head
3 Bikini zone cutting head
3a Bikini zone trimming comb, 5 mm
3b Bikini zone trimming comb, 8 mm
4 On/off switch « I / O »
5 Battery compartment cover
6 Brush

Inserting the battery

This appliance operates with one AAA
1.5 V battery. For best performance, use
an alkaline manganese battery (type
LR03, AM4, AAA, e.g. Duracell). This
battery provides a shaving capacity of
3
approximately 120 minutes. Frequent use
of the bikini zone cutting head (3) will
reduce the operation time.
• Make sure the appliance is turned off.
• Remove the battery compartment cover
(5) by pulling downwards (a).
• Insert the battery with the (+) and (–)
poles in the direction marked.
• Close the battery compartment.
Using the cutting heads
The appliance comes with different
cutting heads that are uniquely contoured
to remove unwanted hairs on every curve
of your body, face and bikini area.
Getting started
• Remove the protective cap (1).
• Slide the on/off switch (4) up to turn the
appliance on.
• Place the cutting head near to the hair
to be removed and guide it slowly
against the direction of hair growth.
For optimum results, pull the skin taut
with one hand while using.
• Turn the appliance off before changing
the cutting heads.
• To remove the cutting head, rotate it
counter-clockwise 90°, then lift it (b).
To attach another one, insert it into the
opening, then rotate 90° clockwise until
it clicks into place.
The precision cutting head (2) is perfect
for detailing of eyebrows and removal of
stray hairs on all body areas.
The bikini zone cutting head (3) is ideally
suited for use in the bikini area to cut
precise lines or contours like the bikini
line.
Bikini zone trimming
For trimming hair in the bikini zone to
a uniform length, attach one of the bikini