User Instructions; Inserting/Replacing The Batteries - Gewiss Chorus GW 10 764 Manuel D'installation

Masquer les pouces Voir aussi pour Chorus GW 10 764:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Before proceeding, make sure you have
removed the fixing screw that might be holding
together the front and the fixed part.
To access the timed thermostat battery
compartment, separate the removable part
from the fixed part by pulling the front towards
you.
Insert two 1,5 (type AA) batteries, housing first
the one nearest the connector and respecting
the polarities shown (when removing the
batteries, follow these steps in the reverse
order). When you have finished, reconnect the
front to the fixed part.
ATTENTION
- Replace all the batteries at the same time.
- Do not use old and new batteries together.
- Use batteries of the same type (do not mix alkaline batteries with carbon
zinc ones).
- Do not throw old batteries into a fire.
- Batteries are classified as special waste, so their disposal is subject to
precise legal dispositions and they must therefore be delivered to the
appropriate waste collection centres.

USER INSTRUCTIONS

Inserting/replacing the batteries

23
E
N
G
L
I
S
H

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Chorus gw 12 764Chorus gw 14 764

Table des Matières