Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.Operating elements
Hand crank for manual cleansing
●
Turning the hand crank in either direction will clean the filter cartridge. In doing so, the
cartridge's folds will gently be hit by two paddles (from the raw-gas side). Hereby, coarse
and free-flowing dust is effectively beaten off the filter. The particles beaten off during this
process will be collected in a dust collection box and can easily be disposed. If necessary,
a low-contamination disposal is rendered possible by inserting an antistatic dust collection
bag into the dust collection box.
6.Maintenance
Cleaning the device
Always disconnect the FPV device and the downstream-connected fume extraction device
from the mains supply before cleaning.
The case material is covered with a resistant finish. A wet cloth will suffice for cleaning the
unit. Use ordinary cleaner. Do not use dissolver!
Please take care that the cleaning water does not get in contact with the electrical parts or
intrudes into the louvers. Get everything dry with a cloth.
FPV 100 V4.30
Filter change with protective clothing/equipment only
-17-
Technische Änderungen vorbehalten
Technical changes reserved
Sous réserve de modifications techniques
Publicité
Chapitres
Table des Matières
