Installation & Setup - D-Link DMS-106XT Guide D'installation

Connect the Switch to Your Network
1
Router
Internet
2
3
4
If you just need normal data transmission, leave the switch in standard mode to enable excellent
performance in a Wi-Fi 6 network.
2
Installation & Setup
Step 1
Plug the supplied power adapter into the DMS-106XT and the
other end into a power outlet, power strip, or surge protector
(recommended). Verify that the Power indicator is lit on the switch.
Power
Step 2
If your switch will be up-linking to your existing gateway/router/
firewall, connect another Ethernet cable from your gateway/router/
firewall LAN port to an available port on your switch.
Step 3
Connect one end of an Ethernet cable into the device you want to
connect to the switch and the other end into one of the Ethernet
ports on the switch. Check the Link lights (LEDs) on the switch to
verify a proper connection.
LED
Step 4 (optional)
Turn on TURBO mode to enable low latency and multicast function
to make your network efficient for multi-media application
(e.g. gaming, video streaming or file download.. etc).
The port-based QoS will be activated as well when TURBO mode is
on. The user may connect the device to the desired port.
Port 1 & Port 6> Port 2> Port 3> Port 4>Port 5
(Port 6 10GE uplink port has the highest priority as Port 1).
DMS-106XT