Use; Set Up And Charging - AcceleDent OPTIMA Mode D'emploi

5.0 Use

5.1. Set-Up and Charging
5.1.1. Power the Charging Case by connecting the USB Charging Cable to an
electrical source.
5.1.2. Open Charging Case by pushing down on the top of the latch (Unlock symbol).
Check to make sure the AcceleDent Optima Activator is secure in the Charging Case
for proper charging. To close the lid securely, push down on the front of the latch
(Lock symbol).
Note: The lid does not need to be closed for proper charging.
5.1.3. The Status Indicator on the AcceleDent Optima Activator will be solid
orange while charging and turn off when fully charged.
5.1.4. Prior to first use, charge for at least 8 hours.
5
Page of 51
BACK TO CONTENTS