Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10.11.2.1. AcceleDent Optima is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The
customer or the user of AcceleDent Optima can help prevent, reduce or
correct electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters)
and the AcceleDent Optima device as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum
Separation distance according to frequency of transmitted
output power of
m
transmitter
W
1150 kHz to 80 MHz
d=1.2√P
0.01
0.12
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter,
where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
10.12. CAN ICES -3 (B)/NMB-3(B)
10.12.1. This device complies with Industry Canada's licence -exempt RSSs.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
10.13. Environmental Specifications
10.13.1. Electromagnetic Requirements:
10.13.1.1. AcceleDent Optima complies with all applicable and
required standards for electromagnetic compatibility.
AcceleDent Optima is suitable for the home healthcare environment meaning
all environments except for near active HF SURGICAL EQUIPMENT and
areas of high intensity of EM DISTURBANCE.
10.13.1.2. AcceleDent Optima transmits and receives electromagnetic
energy at 288 kHz +/- 10 kHz for the purposes of wireless charging.
AcceleDent Optima complies with the Bluetooth Low Energy (BLE) standard; it
80 MHz to 800 MHz
d=1.2√P
0.12
BACK TO CONTENTS
800 MHz to 2.5 GHz
d=2.3√P
.23
19
Page
of 51
Publicité
Chapitres
Table des Matières
