IFM Electronic ASinterforce AC005A Notice De Montage page 6

inputs
3 4
n.c.
2 1
socket M12
sensor supply L+
sensor supply L-
data input I
not connected
Addressing
Assign a free address between 1 and 31. At the factory the address is
set to 0.
Addressing with the adressing unit AC1144
If it is used with the FC lower part AC5000 the module must first be
addressed via the addressing unit AC1144 and then mounted onto the
lower part.
Infrared addressing
The AS-i module also offers the option of infrared addressing with the
addressing unit AC1144.
The AS-i communication (yellow cable) must be switched off
during the infrared addressing.
Supply the slaves with voltage via the AS-i power supply. Addressing is
carried out via the IR addressing cable E70211.
When the ifm AS-i power supplies type SL are used the communica-
tion can be deactivated via a plug on the power supply. To do so, dis-
connect the master.
6
PAGE
4x LED1 yellow
pin
1
3
2+4
5
LED infrared reciever
LED2 red FAULT
fixture
infrared
adapter
LED green
PWR sensor
supply o.k
4 sockets
M12