Volpi Kamikaze KV4 Manuel De L'utilisateur page 37

5 - Press the cover and turn it in the direction of
the arrow.
7 - Insert the end of the thread into the hole of
the machine.
9 - Pay attention to the direction of the thread
which must NOT have knots, distortions or
wrap-around of any kind.
6 - Close the thread press lever.
8 - With the tweezers remove the two threads
outside the coil.
10 - After positioning the thread, turn on the
power switch and pull the trigger. Make sure
that the thread is correctly positioned into
the machine.
37