Assemble Battery - Volpi Kamikaze KV4 Manuel De L'utilisateur

12. Assemble battery

Please check if tying machine and battery are clean and dry, then conduct assembly according to the
following steps:
•
Take the previously charged battery from the case and insert it in the appropriate seat of the tying
machine
•
See the following figures:
1 - Open the thread press lever.
3 - Remove the cover.
2 - Press the cover down and rotate it in the
direction of the arrow, remove the cover.
4 - Insert the coil of thread paying attention to
the direction of the thread coming out.
36