Publicité
Les langues disponibles
Les langues disponibles
Safety Precautions
The
installation of this speaker cabinet must be carried out by
•
standards.
Do not
attempt to clean the plastic enclosure
•
Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment or smoke
•
machines.
Do
not
expose
the
•
and
will
be hazardous.
Do
not
stack the speaker cabinet
•
Additional precautions for amplified devices of the series.
Before installation, ensure that the voltage and frequency
•
requirements of the loudspeaker.
Disconnect from the mains prior to making connections
•
Make sure
that
the power-cord is never crimped nor damaged by sharp edges. Never
•
come
into
contact
Replace the fuse only by a fuse with the same specifications as the original
•
Warning
Before connecting
or
operating your new speaker, please read the instruction manual carefully.
Functions
1. LCD display with MP3 controls
3. SD/MMC/MS card input
5. Bluetooth LED
7. Mic input via XLR Female or 6.5mm Jack connector
9. Line level control
11. AUX input via RCA or XLR Female connector
13. Bass control
15. Power LED: Light up when the unit is switched on
17. Mains connector
Bluetooth pairing procedure
- Press MODE button to toggle between USB/SD input and Bluetooth
- The Bluetooth icon flashes if the unit is not paired
- The unit is identified as "Bluetooth"
- The paring code is "0000"
- The Bluetooth icon remains steadily light up when the unit is paired.
Specifications
Max. power ...................................................................................300W
RMS power ....................................................................................150W
Woofer size ........................................................................... 15"/38cm
Woofer coil size ..................................................................................2"
Woofer Magnet ............................................................................ 40 Oz
Woofer impedance .................................................................... 8 ohms
Horn driver ......................................................................................... 1"
HF driver protection ......................................................................... PTC
Crossover frequency point ............................................................ 2kHz
Frequency response ............................................................ 40Hz-20kHz
Sensitivity 1W/1m ................................................................. 90dB ±3dB
Weight ........................................................................................ 12.5kg
Dimensions ........................................................... 410 x 350 x 680(mm)
©Copyright LOTRONIC 2013
speaker cabinet to direct rain or water.
in
a manner that could cause injury if a cabinet becomes dislodged.
with
other cables. Only handle the power-cord by the plug.
GB
F
qualified
persons following the approved safety
with
solvents or petrochemical based cleaners.
Liquid
getting
of
power outlet match
to
the speaker.
2. USB input
4. Bluetooth antenna
6. Mode switch
8. Microphone level control
10.Master volume control
12. Treble control
14. Clip LED: Reduce the volume or the line level when is
LED lights up
16. LINE output via 6.5mm Jack or XLR Male connector
18. ON/Off switch
QMS15A
into
the box
will
risk
a short circuit
the
power
let
the power-cord
one.
3
Publicité
