Using Further Nozzles (Accessories) - Centronic Dirt Devil M2615 Instructions D'utilisation Et Consignes De Sécurité

2 Unpacking and assembling
2
1
3
Fig. 5
2.3 Using further nozzles
(accessories)
1
2
Fig. 6
Fig. 7
70
5. Push the accessory holder (Fig. 5/3) onto the telescopic
5
4
tube (Fig. 5/1) below the telescopic tube lock (Fig. 5/2).
Then push the furniture brush (Fig. 5/4) and the crevice
nozzle (Fig. 5/5) onto the holders.
Your vacuum cleaner is now ready for use.
Besides the floor nozzle (Fig. 1/1) you just attached, you
may extend the functions of your cylinder vacuum cleaner
with other nozzles.
- Crevice nozzle (Fig. 6/1); Use this to vacuum dust
from hard to reach places.
- Furniture brush(Fig. 6/2): Use this to remove dust
from objects with delicate surfaces (e.g. cupboards
and tables).
- Turbo brush (Fig. 7/1): For thoroughly deep clean-
ing of carpets with the revolving brush head.
NOTE:
The brush rotating at high speed makes a loud noise dur-
ing operation.
- Parquet brush (Fig. 7/2): For vacuuming especially
delicate surfaces (e. g. parquet, laminate) with its
long, soft bristles.
WARNING:
Danger of injury! Only attach the nozzles if the appliance
is not connected to the power supply. Otherwise, the
appliance could be switched on by accident.
ATTENTION:
Use only intact nozzles. Damaged nozzles may scratch
or damage surfaces and objects.