Permitted Loads; Ambient Conditions - EOS RELAX Notice De Montage, D'utilisation Et D'entretien

To increase the user's safety, we recommend placing the bed in its lowest
position, especially when sleeping.
2.2.

Permitted loads

Maximum safe working load (including mattress, user, attachable
accessories)
Maximum occupant/patient weight
Maximum load on the backrest and foot section (each)
The maximum safe working load requires a weight distribution of approx. 45%
on the backrest, 25% on the middle section and 30% on the foot section.
2.3.

Ambient conditions

Equipment that generates strong magnetic fields which could interfere with the
bed's control unit should not be used in the bed's immediate vicinity. Con-
versely, the bed may generate electromagnetic fields during operation that
may affect nearby measuring equipment; nevertheless the bed complies with
the EN 60601-1-2 standard. Some residual risks remain.
The bed must not be used if there is a risk of explosion or in the presence of
flammable, volatile gases, e.g.anaesthetics.
The bed may only be used under the following ambient conditions:
- Temperature:
- Humidity:
- Air pressure:
In case of higher temperatures during delivery, let the bed rest for 24 hours
before using it or connecting it to the mains.
between 5°C and 40°C
20% to 90% at 30°C without condensation
700 to 1060 hPa
58
200 kg
150 kg
80 kg