Use - Franke FNES 907 BTH XS/GLASS Mode D'emploi Et Installation

USE

A
Button Function
Carriage Closed: Press for approx. 1.5 Seconds to open
A
the carriage, turn the lights on, turn the Fans on and start
the Motor at the last speed set.
Carriage Open: Press briefly to turn the Motor off or to
start it at the last speed set. Press for 1.5 seconds to turn
the Motor and the Fans off and to close the carriage.
B Press briefly to decrease the working speed.
Press for 2 Seconds to turn the Fans off.
Once the Fans are turned off they will turn on automati-
cally every time the Carriage is extracted, or when the
Working speed is increased.
C Increase the working speed.
D Intensive function:
Can only be activated with the Carriage open at any
speed and with the Motor turned off. It has a timer set to
10 minutes, after which the system will return to the
speed set before. Suitable to deal with maximum levels
of cooking fumes.
When the function is enabled/disabled, the Fans are en-
abled/disabled.
Cannot be enabled when Delay or 24H are on.
E 24H function:
Carriage Closed: The function is enabled and the carriage
remains closed.
Carriage Open: When the function is enabled the Motor
and the Fans turn off and the carriage returns; After this
the 24H function starts.
Starts the Motor at a speed that allows suction of 100
m3/h for 10 minutes per hour for 24h, after which the
Motor will stop.
When the filter alarm is active, press the button for ap-
proximately 4 seconds with the Motor and Lights off to
reset the alarm. Reset is indicated by the fact that the
Display turns off.
These signals are only visible when the Motor is off.
F Delay function:
Enables automatic shutdown of the Motor, the Fans and
the Lighting with a 30' delay.
Cannot be enabled when Intensive or 24H are on.
G Turns the lighting system on and off.
Press for 2 Seconds to allow an optional additional appli-
ance to be turned on and off.
H Turns the reduced intensity lighting system on and off.
Warning: Never rest anything on the sliding carriage when it is open!
EN
B C D
Control panel
E F G H
Display
Displays the set speed.
With the Fans on, the Display on the left shows
an animation.
-
-
Displays HI and the time remaining, alternately.
It is disabled by pressing the Button or turning
the Motor off.
Displays 24, and the dot on the Right flashes
once a second when the Motor is on, while
when the Motor is off only 24 appears.
It is disabled by pressing the Button or turning
the Motor off.
When the procedure terminates, the indication
shown previously turns off:
FF indicates the need to wash the metal grease
filters. The alarm is triggered after the Hood has
been in operation for 100 working hours.
EF indicates the need to change the activated
charcoal filters, and to wash the metal grease
filters. The alarm is triggered after the Hood has
been in operation for 200 working hours.
Displays the speed of the Motor and the time
remaining, alternately.
It is disabled by pressing the Button or turning
the Motor off.
1
12
2