Resetting; Change Of Configuration - Velux INTEGRA KLF 200 Manuel D'installation Et Mode D'emploi

Function as interface

Resetting

Change of configuration

Resetting
When resetting, all settings will be deleted and the interface reset to
factory settings.
5 sec
Press the RESET button on the back of the interface for 5 seconds with a
pointed object until the red light-emitting diode is on. Subsequently, the
light-emitting diode turns yellow followed by a red flash.
When the light-emitting diode flashes yellow, the interface has been
reset. This may take up to 1 min.
Change of configuration
For more advanced settings via computer, tablet or smartphone, see sup-
plementary instruction enclosed with the product.
B
ENGLISH
VELUX 23
®