Step 4: Inserting A Memory Card - Sony DEV-30 Mode D'emploi

Jumelles à enregistrement numérique
Masquer les pouces Voir aussi pour DEV-30:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Step 4: Inserting a
memory card
Types of memory card you can use with
this product
"Memory Stick
PRO Duo" media
(Mark2)
"Memory Stick
PRO-HG Duo"
media
"Memory Stick
XC-HG Duo"
media
SD memory card
SDHC memory
card
SDXC memory
card
Operation with all memory cards is not assured.
"Memory Stick PRO Duo" media of up to
32 GB, "Memory Stick XC-HG Duo" media of
up to 64 GB and SD cards of up to 64 GB have
been verified to operate with this product.
Open the battery/memory card
cover (p. 13), and insert the memory
card with the nothched edge in the
direction as illustrated until it clicks.
Note the direction of notched corner.
Close the battery/memory card cover after
installing the memory card.
Described in this
manual, "Memory
Stick PRO Duo"
media
Described in this
manual, "Memory
Stick XC-HG Duo"
media
Described in this
manual, SD card
SD Speed Class 4 or
faster is required.
Access lamp
If the [Preparing image database file. Please
wait.] screen is displayed, wait until the screen
disappears.
Notes
If [Failed to create a new Image Database File.
It may be possible that there is not enough free
space.] is displayed, format the memory card.
Confirm the direction of the memory card.
If you forcibly insert the memory card in the
wrong direction, the memory card, memory
card slot, and/or image data may be damaged.
Do not eject the memory card while the access
lamp is lit. Doing so may cause movies and/or
photos to not be saved on the memory card
properly.
To eject the memory card
Open the battery/memory card cover and
lightly push the memory card in once.
Notes
Movies recorded on "Memory Stick XC-HG
Duo" media and SDXC memory cards cannot
be imported to or played back on computers
or AV devices not supporting the exFAT * file
system by connecting this product to these
devices with the USB cable. Confirm in advance
that the connecting equipment is supporting the
exFAT system. If you connect an equipment not
supporting the exFAT system and the format
screen appears, do not perform the format. All
the data recorded will be lost.
The exFAT is a file system that is used for the
*
"Memory Stick XC-HG Duo" media and SDXC
memory cards.
GB
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dev-50Dev-50v

Table des Matières