Sony DEV-30 Mode D'emploi page 15

Adjust the width so that left and right

images overlap.
Make sure that the image in the viewfinder

does not appear as a double image.
When the viewfinder exceeds the limit of

the adjustable range, you will hear a click.
The viewfinder will not move any further.
4
Set the language, area, summer
time, date & time format, and
date & time using the multi-
selector, then confirm each
setting.
Using the multi-selector
Move the multi-selector towards

/// to select the desired item, and
then press the center of the selector to
complete the selection.
When each setting have been
completed, select [Next].
5
Select [60i (NTSC)] or [50i (PAL)]
to suit the TV color system used
in your country/region, then
select .
When the 60i/50i selection is made,
this product restarts to update the
system.
See page 16 for details on the TV color

system in your country/region.
6
Adjust the relative vertical
position of the right and left
viewfinder.
Make sure that the horizontal line
overlaps the vertical lines.
Image in the left
viewfinder
Image viewed by both eyes
If the horizontal line and the vertical
lines do not overlap, adjust the position
of the image in the right viewfinder by
selecting /
overlap, then select
If you see the image below, the device

works correctly.
If you see the image below even after

adjusting the viewfinder, cease using this
product.
The horizontal line and the vertical lines do not
overlap.
If you cannot see images correctly, this
product may be damaged. Contact
your Sony dealer or local authorized
Sony service facility.
Image in the right
viewfinder
until the lines
.
GB
1