Step 3: Turning The Power On, And - Sony DEV-30 Mode D'emploi

5
When the battery is charged,
disconnect the AC Adaptor
from the DC IN jack of this
product.
Tips

When this product is on, you can check the

approximate amount of remaining battery
power (expected recording and playing time)
with the remaining battery indicator at the
upper right on the screen.
To remove the battery pack
 Turn off this product by pressing the
POWER button (p. 14), then open the
battery/memory card cover (p. 13).
 Slide the battery release lever and
remove the battery.
GB
14
Battery release lever
Step 3: Turning the
power on, and setting
up this product

Notes
If this product is used by more than one person,

adjust the diopter and the width whenever a
different person uses it.
1
Press the POWER button.
This product is turned on.
To turn off the power, press the POWER

button again.
2
Adjust the diopter until you
can see a clear image with each
eye by turning the diopter
adjustment knob.
Eye sensor
Adjust the diopter for each eye separately.

If you bring your eyes close to the

viewfinder, the eye sensor reacts to display
the viewfinder screen.
3
Adjust the width between the left
and right viewfinder to fit your
eyes using the IPD ADJ dial.