Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch RIDE+ Manuel Du Propriétaire

Maintenance and Service

Maintenance and Cleaning

Do not immerse any components, including the drive unit, in
water or clean them with pressurised water.
Clean your on-board computer using a soft cloth dampened
only with water. Do not use any detergents.
Have your eBike system checked by an expert at least once a
year (including mechanical parts, up-to-dateness of system
software).
The bicycle manufacturer or dealer may also store a distance
travelled for the service date in the system. In this case, the
on-board computer will show you that the service date is due
by displaying f " ".
For service or repairs on the eBike, please refer to an
authorised bicycle dealer.

After-sales Service and Application Service

In case of questions concerning the eBike system and its com-
ponents, please refer to an authorised Bosch eBike dealer.
For contact data of authorised Bosch eBike dealers, please
refer to www.bosch-ebike.com
Disposal
The drive unit, on-board computer including operat-
ing unit, battery pack, speed sensor, accessories and
packaging should be disposed of in an environmental-
ly correct manner.
Do not dispose of eBikes and their components into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU, electrical devices/tools that are
no longer usable, and according to the European
Guideline 2006/66/EC, defective or used bat-
tery packs/batteries, must be collected sepa-
rately and disposed of in an environmentally
correct manner.
Please return battery packs and on-board computers that are
no longer usable to an authorised bicycle dealer.
Subject to change without notice.
Bosch eBike Systems
79
English–6
1 270 020 XBP | (22.5.17)