Optional Settings - Panasonic S-63UA1E5 Guide Rapide

OFF/ON TO TURN ON OR OFF THE
UNIT
TO SET TEMPERATURE
• Selection range: 16°C ~ 31°C.
TO SELECT OPERATION MODE
MODE
AUTO mode - For your convenience
• Unit selects operation mode according to temperature
setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
FAN mode - To enables air circulation in the room
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
• During soft dry operation, the indoor fan operates at a
low fan speed.
• The louvers movement might not align with the remote
control display.
TO SELECT FAN SPEED (3 OPTIONS)
FAN SPEED
AUTO LOW
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If the operation mode is set to Fan, the fan speed will
be fi xed at MEDIUM regardless of the temperature
setting.
AIR SWING
TO ADJUST AIRFLOW
AUTO MANUAL DIRECTION
• Keeps the room ventilated.
• The air is discharge evenly through 4 output vents.
AUTO 1
AUTO
• There are 3 options for auto vertical airfl ow direction.
• The vertical airfl ow louver swings up and down
automatically.
• Do not adjust the vertical airfl ow direction louvers by
hand.
MANUAL
• There are 4 options for manual vertical airfl ow
direction.
• The airfl ow direction can be adjusted as desired by
using remote control.
POWER
MEDIUM HIGH
AUTO 2 AUTO 3
TO SET DAILY TIMER TO SET DAILY TIMER
• To turn ON or OFF the unit at a preset time.
SELECT
Select ON or Set the time.
OFF timer.
• To cancel ON or OFF timer, press
• When ON timer is set, the unit may start early before
the actual set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set. For clock setting,
please refer to Remote Control preparation.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually, you can restore the
previous setting by pressing
• If the main power is switched off for an hour or more,
the clock and timer will need to be set again.

OPTIONAL SETTINGS

OPTIONAL SETTINGS
• To avoid unintentional operation, you can
assign a different address to each indoor
unit.
• Press repeatedly to select your desired
address setting.
Group
ADDRESS
• By default, ADDRESS 1 is selected. You
do not need to change this setting for
normal operation.
• If the address is set to GROUP, more
than one indoor unit can be operated at
the same time.
Press to restore the remote control's default
setting.
RC RESET
Not used in normal operations.
SET AC RESET
HINT HINT
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
TIMER
SET
Confi rm.
.
CANCEL
.
SET
Address 1 Address 2 Address 3
7