Yakima BeddyJo Instructions De Montage page 3

LOAD THE BEDDYJO INTO YOUR TRUCK'S BED.
Open truck's tailgate completely.
Close the tailgate
with the wedges
in place.
LOAD THE BIKES.
SET THE BICYCLE FORKS
STRAIGHT DOWN ONTO THE
SKEWERS.
Do not
damage your
forks!
1031973C-3/10
LOAD THE CARRIER.
Insert both
wedges into the
hinge crevice in
the open tailgate.
With lever open, tighten nut until the
lever closes with firm resistance.
• If forks move out of the skewer, open lever
and tighten the nut slightly.
• You may need to loosen or tighten the nut until
the lever closes with firm resistance.
TEST THE
• The wedges are
STABILITY OF THE
secure and the
INSTALLATION
straps tight.
BY TUGGING ON
• The tailgate
FORK ARM.
is closed
completely.
• The bike forks
are held tightly.
You may need to
partially close
the tailgate.
TIGHTEN THE SYSTEM.
Pull the strap ends until black
caps are against the tailgate.
BEFORE DRIVING AWAY,
CHECK THESE THINGS: