Zuzi 4211/20 Y Mode D'emploi page 25

The wavelength selected value will be displayed. To modify this value press
with F1 (2.5) (Fig. 16).
Figure 16
Enter the value of the K coefficient on the new display. Adjust the value digit by digit with
from one digit to the next one select OK with F1 (2.5). When the value of the last digit is adjusted select OK with F1
(2.5) (Fig. 17).
Figure 17
The equipment will enter the B coefficient value adjustment display. Adjust the value digit by digit with
(2.8); to go from one digit to the next one select OK with F1 (2.5). When the value of the last digit is adjusted select
OK with F1 (2.5) (Fig. 18).
The new display will show the curve and its equation.
To determine the concentration of the different samples to be analyzed, put each sample into the light path and
select Test with F1 (2.5). The results will be shown in order in a chart (Fig. 19).
2. Standard curve method
Blank
- Select the option Standard curve with
will be displayed (Fig. 20).
Version 2 Nov-10
Wavelength:
Input coefficient K:
(2.7) (2.8) and then confirm OK with F1 (2.5). Please Insert Blank
Instruction manual 542110x0
(2.7) (2.8) and then confirm OK
Coefficient K:
(2.7) (2.8); to go
Input coefficient B:
Pág. 25
(2.7)