Technical Specifications - Zuzi 4211/20 Y Mode D'emploi

3. TECHNICAL SPECIFICATIONS

Code
Wavelength range
Spectral bandwidth
Optical system
Wavelength accuracy
Wavelength repeatability
Wavelength resolution
Photometrical range
Photometrical accuracy
Photometrical repeatability
Stray light
Stability
Detector
Sample compartment
Lamps
Output
Power
Dimensions
4. INSTALLTION / SETTING UP
Unwrap the spectrophotometer, take off the involving plastic and take off the protection in which it comes fitted.
Take off all the protective items and, without connecting the spectrophotometer to the net, make sure that it does
not present any damage because of the shipment. In case the spectrophotometer presents any damage tell it imme-
diately to your transport agent or dealer so that they can make the claims in the correct time limit.
Please keep the original wrapping; you will always need it for returns enclosed with all the accessories supplied.
Please check that all the accessories are enclosed with the equipment:
- 4 glass cells
- 2 quartz cells (only model Zuzi 4211/50)
- Software MWave Basic (Compatible with MWave
Professional software (Ref. 94251000) not included)
We will only accept any equipment return within 15 days after delivery and provided it comes in its original
wrapping.
Installation
Before using this instrument, it is convenient for you to familiarize with its components and basic essentials.
PLEASE READ THOROUGHLY THE INSTRUCTIONS BEFORE CONNECTING AND OPERATING WITH THIS
EQUIPMENT.
Please put the spectrophotometer on top of a horizontal, plane and stable table making a free space of at least 30
cm per side. Do not put the spectrophotometer near any warm supply (burners, blowlamps...), nor expose it
directly to the sun, etc. Avoid inflammable or toxic substances in the working area.
The spectrophotometer is supplied with a Schuko standard wire. Please insert the wire that feeds the AC electric
current in the base of current 220 V, 50 Hz ± 10% provided with earth wire and to the other end to the spectropho-
tometer connector.
Version 2 Nov-10
54211020
325-1000 nm
Simple beam, grating 1200 lines/mm
-0.097/2.5 A, 0/125% T
± 0.002 A/h at 500 nm
Silicon photodiode
4 cells of 10 mm
Tungsten
USB port, parallel port (printer)
AC 220V/50Hz or AC110V/50HZ
480x360x160 mm
- USB wire
- Schuko wire
- User's manual
- Warranty
Instruction manual 542110x0
54211050
200-1000 nm
4 nm
± 1nm
0.5 nm
± 1 nm
± 0.5 %T
± 0.3 %T
0.3% T
Tungsten anddeuterium
Pág. 19